Update Method 1, Use A Lan - Motorola fx7400 Integrator Manual

The parameter is the file type,
-t
" " comments out the rest of the line.
;

Update Method 1, Use a LAN

This is the preferred method, since readers are typically on a LAN and the update does not require existing
connections to change.
Create a folder on a local ftp server and name it:
1.
Download the firmware files from
2.
zipped.
Ensure that the readers can be pinged from the host computer. If they cannot, consult with the network
3.
administrator.
On the reader to update, access the web based
4.
Open a browser and type the IP address of the reader to update (format example: http://157.235.88.147).
a.
The
Reader Administrator Console
Enter the user name and password. If this is the first time accessing the console, a prompt appears for a
b.
user name and password update. The default settings are:
Username:
Password:
The
Administrator Console Main Menu
From the
5. Console Main Menu
Click the
6. Enable/Disable Polling
disabled.
Select
7. Maintenance
Maintenance chapter that was removed; remove step??]
Select
8. Version
page 4-22. [refers to Maintenance chapter that was removed; remove step??]
To upgrade the firmware:
9.
Ensure the ftp server is running on the host computer.
a.
Ensure the TFTP server is running on the host computer, and that the file path is the same as when
b.
logging on using the FTP server.
On the
c. Version Control
For the ftp Server link, enter ftp://<ip address of host computer>/filepath (format example:
ftp://192.168.1.3// FX UPDT/ReleaseXXX). Be sure to enter an IP address; entering the host name does
not work.
Enter the ftp server user name.
Enter the ftp server password.
NOTE If using the default host computer ftp server, the system user name and password may be required
(consult the system administrator).
is the name of the file, and
-f
http://www.support.symbol.com
login screen appears. See
admin
change
select
Scan Control the Reader Scan Control
button to set
. The
Reader Maintenance Console
. The screen appears with the current version information. See
Version Control
screen, enter in the following information:
Firmware Upgrade Procedures
the size. Ensure the file size is correct.
-s
\FXUPDT\ReleaseXXX
into this folder and unzip the files if they are
Administrator Console
Connect to the Reader on page
appears. See Figure 4-14 on page
. The button reads
Disable Polling
appears. See Figure 4-1 on page
.
:
4-12.
.
when polling is
Enable Polling
4-2. [refers to
Figure 4-14 on
B - 3
4-3.