Motorola fx7400 Integrator Manual page 100

B - 6 FX Series RFID Readers Integrator Guide
Upgrade the firmware:
9.
NOTE Refer to the release notes to determine which files changed; Not all of the files are updated in every
release. There is no specific order necessary when installing these files.
Ensure that an ftp server is running on the host computer.
a.
Do not change any other default setting (the necessary defaults should already be in
C:/FXUPDT/ReleaseXXX).
On the
b. Version Control
For the ftp Server link, enter ftp://<ip address of host computer>/filepath (ftp://192.168.1.5// FXUPDT/
ReleaseXXX). Be sure to enter an IP address; entering the host name does not work.
Enter the ftp server user name.
Enter the ftp server password.
NOTE If using the default host computer ftp server, the system user name and password may be required
(consult the System Administrator).
Click Start Update. See
c.
Maintenance chapter that was removed; remove step??]
The green LED on the reader flashes during the update. The reader application software first downloads
d.
osupFX.exe
Osupdate
files to Flash. If the ftp is not successful, no files are written to Flash.
This update can take up to 15 minutes. Do not remove power to the reader or reboot the reader during the
e.
update.
The reader reboots when the update completes.
f.
Log onto the web console and access the
10.
screen, enter in the following information:
Figure 4-14 on page
, , and
FlashUpdateUtility.dll
then downloads all files specified in the
4-22. The reader indicates that it is shutting down.
files, starts running
Response.txt
file into RAM, and if successful writes the
Response.txt
window. Verify the new upgrade version is running.
Version Control
[refers to
, and shuts down.
Osupdate