Appendix B Firmware Upgrade Procedures; Introduction; Prerequisites - Motorola fx7400 Integrator Manual

Appendix B Firmware Upgrade Procedures

Introduction

This appendix provides the reader firmware upgrade procedure using the web-based
There are two methods to update reader firmware:
Update Method 1, Use a LAN on page B-3
•
connected to a LAN.
Update Method 2, Direct Connect Over the Ethernet Port on page B-5
•
a single reader using an Ethernet crossover cable.
Each of the following types of firmware performs unique changes to the current settings and can be upgraded
independently. Available firmware includes:
Monitor Version
•
OS Version
•
Application Server Version
•
MAC Radio Firmware Version
•
Radio API Version
•

Prerequisites

The following items are required to perform the update:
Reader with power supply
•
Laptop (or other host computer)
•
If using the LAN Update procedure, a Cat5 ethernet cable is required
•
If using the Direct-Connect update procedure a Cat5 Crossover cable is required
•
An ftp server on the host computer
•
- the preferred method when there are a number of readers
Administrative Console
- the preferred method when updating
.