Associating Tags (Writing Tags) With Bc, Re-Commission; Installation; Configuration And Optimization; Optimizing Reader Functions - Motorola fx7400 Integrator Manual

Associating Tags (writing tags) with BC, Re-Commission

Associating Tags (writing tags) with BC, re-commission example prameters: The reader reads X tags in X seconds
at a distance of X feet.
Can be single item, multiple items, or multiple tags (only interested in one). Readers can be in a dense
environment or separated /shielded area. Additional filtering may be needed. Indicate how reads can be triggered.

Installation

Identify the unique installation challenges for the Associating Tags (writing tags) with BC, re-commission
example.The location of the reader and antennas will be discussed and the procedures to optimize the tag reads.
•
Reference RFID Technology Overview on page 2-1
• Reference
• Reference
and provide the unique communications connections installation for a Associating Tags (writing tags) with
BC, re-commission installation.
• Reference
installation requirements for a Associating Tags (writing tags) with BC, re-commission installation.

Configuration and Optimization

Identify the unique configuration and optimization challenges for the Associating Tags (writing tags) with BC,
re-commission example. Reference
•
Reference Reader Administrator Console on page 4-12
•
Reference Managing the FX Series RFID Readers on page 4-2
and provide the unique reader management configuration optimization requirements for a Associating Tags
(writing tags) with BC, re-commission installation.

Optimizing Reader Functions

Identify the unique function optimization challenges for the Associating Tags (writing tags) with BC, re-commission
example.
For each setup illustrate:
•
Filtering (select statement)
•
Query tuning (Q, Session, Select bit)
•
Post read filtering
•
Writing, locking, killing

Troubleshooting

Identify the unique reader troubleshooting challenges for the Associating Tags (writing tags) with BC,
re-commission example. Reference
•
Reference Troubleshooting on page 6-1
troubleshooting requirements for a Associating Tags (writing tags) with BC, re-commission installation.
Introduction on page 3-1 for an installation overview.
Communications Connections on page 3-6
Reading Tags on page 3-7
Introduction on page 4-1
Introduction on page 6-1
for RFID overview.
for standard communications connections overview
for standard overview and provide the unique tag reading
for a configuration overview.
for standard procedures.
for standard reader management overview
for a troubleshooting overview.
for standard procedures and provide the unique reader
Set-Up Examples 5 - 9