Table of Contents
Advertisement
5 - 4
FX Series RFID Readers Integrator Guide
Exit/Entry
Exit/Entry example prameters: The reader reads 1-20 tags, moving at 4-7 feet per second at distances between
2-8 feet and a read duration 7 seconds.
Filtering may be required depending on environment. Indicate how to adjust the power is (typically a tuning
parameter). This is a short range application, indicate how to optimize this application. Indicate how to write to tags
with the possibility of writing to the wrong tag.
Installation
Identify the unique installation challenges for the Exit/Entry example.The location of the reader and antennas will
be discussed and the procedures to optimize the tag reads.
•
Reference
RFID Technology Overview on page 2-1
• Reference
• Reference
and provide the unique communications connections installation for a Exit/Entry installation.
• Reference
installation requirements for a Exit/Entry installation. 2 AN480 were used with power setting to 30dBm.
Configuration and Optimization
Identify the unique configuration and optimization challenges for the Exit/Entry example. Reference
page 4-1
for a configuration overview.
•
Reference
Reader Administrator Console on page 4-12
•
Reference
Managing the FX Series RFID Readers on page 4-2
and provide the unique reader management configuration optimization requirements for a Exit/Entry
installation.
Optimizing Reader Functions
Identify the unique function optimization challenges for the Exit/Entry example.
For each setup illustrate:
•
Filtering (select statement)
•
Query tuning (Q, Session, Select bit)
•
Post read filtering
•
Writing, locking, killing
Troubleshooting
Identify the unique reader troubleshooting challenges for the Exit/Entry example. Reference
6-1
for a troubleshooting overview.
•
Reference
Troubleshooting on page 6-1
troubleshooting requirements for a Exit/Entry installation.
Introduction on page 3-1
for an installation overview.
Communications Connections on page 3-6
Reading Tags on page 3-7
for RFID overview.
for standard communications connections overview
for standard overview and provide the unique tag reading
for standard procedures.
for standard reader management overview
for standard procedures and provide the unique reader
Introduction on
Introduction on page
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
