5 - 8
FX Series RFID Readers Integrator Guide
Shelf/Tool Crib/Cage Inventory (stretched target)
Shelf/Tool Crib/Cage Inventory (stretched target) example prameters: The reader reads 500 tags in 5 seconds, at a
distance of 12 feet.
Can be single item, multiple items, or multiple tags (only interested in one). Readers can be in a dense
environment or separated /shielded area. Additional filtering may be needed. Indicate how reads can be triggered.
Indicate how to show direction with paired antennas.
Installation
Identify the unique installation challenges for the Shelf/Tool Crib/Cage Inventory (stretched target) example.The
location of the reader and antennas will be discussed and the procedures to optimize the tag reads.
•
Reference
RFID Technology Overview on page 2-1
• Reference
• Reference
and provide the unique communications connections installation for a Shelf/Tool Crib/Cage Inventory
(stretched target) installation.
• Reference
installation requirements for a Shelf/Tool Crib/Cage Inventory (stretched target) installation.
Configuration and Optimization
Identify the unique configuration and optimization challenges for the Shelf/Tool Crib/Cage Inventory (stretched
target) example. Reference
•
Reference
Reader Administrator Console on page 4-12
•
Reference
Managing the FX Series RFID Readers on page 4-2
and provide the unique reader management configuration optimization requirements for a Shelf/Tool
Crib/Cage Inventory (stretched target) installation.
Optimizing Reader Functions
Identify the unique function optimization challenges for the Shelf/Tool Crib/Cage Inventory (stretched target)
example.
For each setup illustrate:
•
Filtering (select statement)
•
Query tuning (Q, Session, Select bit)
•
Post read filtering
•
Writing, locking, killing
Troubleshooting
Identify the unique reader troubleshooting challenges for the Shelf/Tool Crib/Cage Inventory (stretched target)
example. Reference
•
Reference
Troubleshooting on page 6-1
troubleshooting requirements for a Shelf/Tool Crib/Cage Inventory (stretched target) installation.
Introduction on page 3-1
for an installation overview.
Communications Connections on page 3-6
Reading Tags on page 3-7
Introduction on page 4-1
Introduction on page 6-1
for RFID overview.
for standard communications connections overview
for standard overview and provide the unique tag reading
for a configuration overview.
for standard procedures.
for standard reader management overview
for a troubleshooting overview.
for standard procedures and provide the unique reader