Motorola fx7400 Integrator Manual page 86

6 - 4 FX Series RFID Readers Integrator Guide
Troubleshooting (Continued)
Table 6-1
Problem
Failed to confirm the new
Password.
Network configuration change(s)
have not been saved.
New Password is the same as the
old one.
Old Password is not correct.
Commit Finished - New
Configuration Changes have been
accepted.
Discard Accepted - Configuration
reverted to last committed version.
Operation was Successful
Unspecified error occurred - code:
####
The requested page was not found.
Internal Web Server Error.
Request method was NULL.
No query string was provided.
Content length is unknown.
Couldn't read complete post
message.
Possible Causes
The system requires that the
password must be
identically two times.
The user has requested to
log out prior to
committing/reverting the
changes made during their
session.
The system requires the
entry of a new password
(that is different from the
existing password) during
the
Change Password
operation.
The system requires the
entry of the existing
password during the
Change Password
operation.
Requested function was
performed.
A specific error message is
missing for the given status
code.
The system experienced an
internal web server error.
The system does not permit
a proxy program to be
executed from the command
line rather than the web
server.
The system cannot accept
an incorrectly formatted
HTTP POST request (from
an unsupported Browser
application).
The system stopped a
POST operation before
completion.
Possible Solutions
Accurately retype the password twice.
Select one of the Commit/Revert options.
enter a new password that is different from the
existing password.
Accurately retype the password the existing
password.
No action required. The system is reporting that
the request was accepted.
Note the code number, and contact Motorola
Enterprise Mobility support. See
Information on page xi.
Contact Motorola Enterprise Mobility support. See
Service Information on page xi
No action required. The system is reporting that
this action is not permitted.
Use a GET request instead, or update the
software.
Retry the operation, and allow it to complete.
Service