5 - 6
FX Series RFID Readers Integrator Guide
Transition/Impact Door
Transition/Impact Door example prameters: Reader reads 200 tags moveing at 2~4 ft/sec for 7 seconds.
Can be single item, multiple items, or multiple tags (only interested in one). Readers can be in a dense
environment or separated /shielded area. The opportunity to write is typically a lower priority then speed. Additional
filtering may be needed. Indicate how reads can be triggered. Indicate how to show direction with paired antennas.
Installation
Identify the unique installation challenges for the Transition/Impact Door example.The location of the reader and
antennas will be discussed and the procedures to optimize the tag reads.
•
Reference
RFID Technology Overview on page 2-1
• Reference
• Reference
and provide the unique communications connections installation for a Transition/Impact Door installation.
• Reference
installation requirements for a Transition/Impact Door installation.
• 4 AN480 were used with a setting of 30dBm.
Configuration and Optimization
Identify the unique configuration and optimization challenges for the Transition/Impact Door example. Reference
Introduction on page 4-1
•
Reference
Reader Administrator Console on page 4-12
•
Reference
Managing the FX Series RFID Readers on page 4-2
and provide the unique reader management configuration optimization requirements for a Transition/Impact
Door installation.
Optimizing Reader Functions
Identify the unique function optimization challenges for the Transition/Impact Door example.
For each setup illustrate:
•
Filtering (select statement)
•
Query tuning (Q, Session, Select bit)
•
Post read filtering
•
Writing, locking, killing
Troubleshooting
Identify the unique reader troubleshooting challenges for the Transition/Impact Door example. Reference
Introduction on page 6-1
•
Reference
Troubleshooting on page 6-1
troubleshooting requirements for a Transition/Impact Door installation.
Introduction on page 3-1
for an installation overview.
Communications Connections on page 3-6
Reading Tags on page 3-7
for a configuration overview.
for a troubleshooting overview.
for RFID overview.
for standard communications connections overview
for standard overview and provide the unique tag reading
for standard procedures.
for standard reader management overview
for standard procedures and provide the unique reader