Motorola fx7400 Integrator Manual page 58

4 - 20 FX Series RFID Readers Integrator Guide
Change communication related settings by entering information in the text boxes or using the drop-down lists.
2.
See Table 4-1
Configure Network Settings
Table 4-1
Setting
Obtain IP Address
using DHCP
Current IP Address
Subnet Mask
Gateway
DNS Server
MAC Address
Web Server
Shell
File Server
Click
3. Set Properties
Click to return to the
4. Main
Click
5. Commit/Revert
Click to save the changes or
6. Commit
for descriptions of available options.
Description
The Dynamic Host Configuration Protocol server
running on networks can assign a dynamic IP
address to the host and readers. Contact the
system administrator to determine if the network
supports DHCP.
If manually assigning an IP address to the reader,
check with the system administrator to ensure the IP
address is valid in the network.
A mask used to determine to what subnet an IP
address belongs.
The reader uses this IP address to access another
network.
The reader uses the Domain Name System (DNS)
IP address to translate domain names.
Reader MAC address.
Select the port type.
Select the Shell type. Configure the Shell to either
Telnet (unsecure) or SSH (secure) mode, or disable
the shell.
Configure the file server to either FTP (unsecure) or
FTPS (secure) mode, or disable the shell.
.
Administrator Console
. See Commit/Revert on page
Discard
main window.
4-31.
to discard the changes. See
Possible Values
Select the On or the Off button.
IP address to assign to the reader.
IP address dynamically assigned or
user-entered.
Depends on network configuration.
Depends on network configuration.
Checked (enabled) / unchecked
(disabled).
Commit/Revert on page 4-31.