Point Of Sale; Installation; Configuration And Optimization; Optimizing Reader Functions - Motorola fx7400 Integrator Manual

Rfid readers
Hide thumbs Also See for fx7400:
Table of Contents

Advertisement

5 - 2
FX Series RFID Readers Integrator Guide

Point of Sale

POS (Point of Sale) example prameters: Reader reads 10 different tags within 300 ms.
Can be single item, multiple items, or multiple tags. POS readers can be dense or separated/shielded area.
Indicate how POS readers can add writing. Indicate how reads can be triggered.

Installation

Identify the unique installation challenges for the POS example. The location of the reader and antennas (under
the read table) will be discussed and the procedures to optimize the tag reads.
Reference
RFID Technology Overview on page 2-1
• Reference
• Reference
and provide the unique communications connections installation for a POS installation.
• Reference
installation requirements for a POS installation. Discuss antenna location one foot below the table (other
options?) discuss the Mobile Mark (BP6-915LP) antenna and the power setting of 20dBm.

Configuration and Optimization

Identify the unique configuration and optimization challenges for the POS example. Reference
page 4-1
for a configuration overview.
Reference
Reader Administrator Console on page 4-12
Reference
Managing the FX Series RFID Readers on page 4-2
and provide the unique reader management configuration optimization requirements for a POS installation.
Discuss optimization techniques for an under the table reader antenna.

Optimizing Reader Functions

Identify the unique function optimization challenges for the POS example.
For the setup illustrate:
Filtering (select statement)
Query tuning (Q, Session, Select bit)
Post read filtering
Writing, locking, killing

Troubleshooting

Identify the unique reader troubleshooting challenges for the POS example. Reference
a troubleshooting overview.
Reference
Troubleshooting on page 6-1
troubleshooting requirements for a POS installation.
Introduction on page 3-1
for an installation overview.
Communications Connections on page 3-6
Reading Tags on page 3-7
for RFID overview.
for standard communications connections overview
for standard overview and provide the unique tag reading
for standard procedures.
for standard reader management overview
for standard procedures and provide the unique reader
Introduction on
Introduction on page 6-1
for

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents