Faceplate Interface; Faceplate - GE T60 Instruction Manual

4.2 FACEPLATE INTERFACE

4.2FACEPLATE INTERFACE
The front panel interface is one of two supported interfaces, the other interface being EnerVista UR Setup software. The
front panel interface consists of LED panels, an RS232 port, keypad, LCD display, control pushbuttons, and optional user-
programmable pushbuttons.
The faceplate is hinged to allow easy access to the removable modules. There is also a removable dust cover that fits over
the faceplate which must be removed in order to access the keypad panel. The following figure shows the horizontal
4
arrangement of the faceplate panels.
Front panel
RS232 port
Small user-programmable
(control) pushbuttons 1 to 7
The following figure shows the vertical arrangement of the faceplate panels for relays ordered with the vertical option.
4-4
Courtesy of NationalSwitchgear.com
LED panel 1 LED panel 2
Figure 4–2: UR-SERIES HORIZONTAL FACEPLATE PANELS
MENU
MESSAGE
HELP
ESCAPE
VALUE
ENTER
STATUS EVENT CAUSE
IN SERVICE VOLTAGE
TROUBLE CURRENT
TEST MODE FREQUENCY
TRIP OTHER
ALARM PHASE A
PICKUP PHASE B
PHASE C
NEUTRAL/GROUND
Figure 4–3: UR-SERIES VERTICAL FACEPLATE PANELS
T60 Transformer Management Relay
LED panel 3
User-programmable
pushbuttons 1 to 12
DISPLAY
7 8 9
4 5 6
KEYPAD
1 2 3
.
0 +/-
LED PANEL 3
LED PANEL 2
RESET
LED PANEL 1
USER 1
USER 2
USER 3
4 HUMAN INTERFACES

4.2.1 FACEPLATE

Display
Keypad
827801A7.CDR
GE Multilin