Contact Inputs - GE T60 Instruction Manual

6 ACTUAL VALUES
6.2STATUS
For status reporting, 'On' represents Logic 1 and 'Off' represents Logic 0.
NOTE
PATH: ACTUAL VALUES

CONTACT INPUTS

MESSAGE
The present status of the contact inputs is shown here. The first line of a message display indicates the ID of the contact
input. For example, 'Cont Ip 1' refers to the contact input in terms of the default name-array index. The second line of the
display indicates the logic state of the contact input.
PATH: ACTUAL VALUES
VIRTUAL INPUTS
MESSAGE
The present status of the 64 virtual inputs is shown here. The first line of a message display indicates the ID of the virtual
input. For example, 'Virt Ip 1' refers to the virtual input in terms of the default name. The second line of the display indicates
the logic state of the virtual input.
PATH: ACTUAL VALUES
REMOTE INPUTS
MESSAGE
The present state of the 32 remote inputs is shown here.
The state displayed will be that of the remote point unless the remote device has been established to be "Offline" in which
case the value shown is the programmed default state for the remote input.
GE Multilin
Courtesy of NationalSwitchgear.com
STATUS CONTACT INPUTS
Cont Ip 1
Off
Cont Ip xx
Off
STATUS VIRTUAL INPUTS
Virt Ip 1
Off
Virt Ip 64
Off
STATUS REMOTE INPUTS
REMOTE INPUT
STATUS: Off
REMOTE INPUT 32
STATUS: Off
T60 Transformer Management Relay
↓
↓
↓
↓
Range: On, Off
1
↓
↓
Range: On, Off
6.2 STATUS
6.2.1 CONTACT INPUTS
6.2.2 VIRTUAL INPUTS
6.2.3 REMOTE INPUTS
6-3
6