Replacement Modules - GE T60 Instruction Manual

2.1 INTRODUCTION
Replacement modules for vertical and horizontal units can be ordered separately as shown in the following tables. When
ordering a replacement CPU module or faceplate, please provide the serial number of your existing unit.
Replacement module codes are subject to change without notice. Refer to the GE Multilin ordering page at
www.GEindustrial.com/multilin/order.htm
NOTE
2
Table 2–5: ORDER CODES FOR REPLACEMENT MODULES, HORIZONTAL UNITS
POWER SUPPLY
(redundant supply only
available in horizontal units; must
be same type as main supply)
CPU
FACEPLATE/DISPLAY
DIGITAL
INPUTS/OUTPUTS
CT/VT
MODULES
(NOT AVAILABLE FOR THE C30)
INTER-RELAY COMMUNICATIONS
TRANSDUCER
INPUTS/OUTPUTS
2-6
Courtesy of NationalSwitchgear.com
for the latest details concerning T60 ordering options.
** - *
UR -
| 1H | 125 / 250 V AC/DC
| 1L | 24 to 48 V (DC only)
| RH | redundant 125 / 250 V AC/DC
| RH | redundant 24 to 48 V (DC only)
| 9E | RS485 and RS485 (Modbus RTU, DNP 3.0)
| 9G | RS485 and 10Base-F (Ethernet, Modbus TCP/IP, DNP 3.0)
| 9H | RS485 and Redundant 10Base-F (Ethernet, Modbus TCP/IP, DNP 3.0)
| 9J | RS485 and multi-mode ST 100Base-FX (Ethernet, Modbus TCP/IP, DNP 3.0)
| 9K | RS485 and multi-mode ST redundant 100Base-FX (Ethernet, Modbus TCP/IP, DNP 3.0)
| 9L | RS485 and single mode SC 100Base-FX (Ethernet, Modbus TCP/IP, DNP 3.0)
| 9M | RS485 and single mode SC redundant 100Base-FX (Ethernet, Modbus TCP/IP, DNP 3.0)
| 9N | RS485 and 10/100Base-T (Ethernet, Modbus TCP/IP, DNP 3.0)
| 9P | RS485 and single mode ST 100Base-FX (Ethernet, Modbus TCP/IP, DNP 3.0)
| 9R | RS485 and single mode ST redundant 100Base-FX (Ethernet, Modbus TCP/IP, DNP 3.0)
| 3C | Horizontal faceplate with keypad and English display
| 3D | Horizontal faceplate with keypad and French display
| 3R | Horizontal faceplate with keypad and Russian display
| 3P | Horizontal faceplate with keypad, user-programmable pushbuttons, and English display
| 3G | Horizontal faceplate with keypad, user-programmable pushbuttons, and French display
| 3S | Horizontal faceplate with keypad, user-programmable pushbuttons, and Russian display
| 4A | 4 Solid-State (no monitoring) MOSFET outputs
| 4B | 4 Solid-State (voltage with optional current) MOSFET outputs
| 4C | 4 Solid-State (current with optional voltage) MOSFET outputs
| 4D | 16 digital inputs with Auto-Burnishing
| 4L | 14 Form-A (no monitoring) Latching outputs
| 67 | 8 Form-A (no monitoring) outputs
| 6A | 2 Form-A (voltage with optional current) and 2 Form-C outputs, 8 digital inputs
| 6B | 2 Form-A (voltage with optional current) and 4 Form-C outputs, 4 digital inputs
| 6C | 8 Form-C outputs
| 6D | 16 digital inputs
| 6E | 4 Form-C outputs, 8 digital inputs
| 6F | 8 Fast Form-C outputs
| 6G | 4 Form-A (voltage with optional current) outputs, 8 digital inputs
| 6H | 6 Form-A (voltage with optional current) outputs, 4 digital inputs
| 6K | 4 Form-C and 4 Fast Form-C outputs
| 6L | 2 Form-A (current with optional voltage) and 2 Form-C outputs, 8 digital inputs
| 6M | 2 Form-A (current with optional voltage) and 4 Form-C outputs, 4 digital inputs
| 6N | 4 Form-A (current with optional voltage) outputs, 8 digital inputs
| 6P | 6 Form-A (current with optional voltage) outputs, 4 digital inputs
| 6R | 2 Form-A (no monitoring) and 2 Form-C outputs, 8 digital inputs
| 6S | 2 Form-A (no monitoring) and 4 Form-C outputs, 4 digital inputs
| 6T | 4 Form-A (no monitoring) outputs, 8 digital inputs
| 6U | 6 Form-A (no monitoring) outputs, 4 digital inputs
| 8F | Standard 4CT/4VT
| 8G | Sensitive Ground 4CT/4VT
| 8H | Standard 8CT
| 8J | Sensitive Ground 8CT
| | C37.94SM, 1300nm single-mode, ELED, 1 channel single-mode
2A
| 2B | C37.94SM, 1300nm single-mode, ELED, 2 channel single-mode
| 2E | Bi-phase, single channel
| | Bi-phase, dual channel
2F
| 72 | 1550 nm, single-mode, LASER, 1 Channel
| 73 | 1550 nm, single-mode, LASER, 2 Channel
| | Channel 1 - RS422; Channel 2 - 1550 nm, single-mode, LASER
74
| 75 | Channel 1 - G.703; Channel 2 - 1550 nm, Single-mode LASER
| 76 | IEEE C37.94, 820 nm, multimode, LED, 1 Channel
| | IEEE C37.94, 820 nm, multimode, LED, 2 Channels
77
| 7A | 820 nm, multi-mode, LED, 1 Channel
| 7B | 1300 nm, multi-mode, LED, 1 Channel
| | 1300 nm, single-mode, ELED, 1 Channel
7C
| | 1300 nm, single-mode, LASER, 1 Channel
7D
| 7E | Channel 1 - G.703; Channel 2 - 820 nm, multi-mode
| | Channel 1 - G.703; Channel 2 - 1300 nm, multi-mode
7F
| 7G | Channel 1 - G.703; Channel 2 - 1300 nm, single-mode ELED
| 7H | 820 nm, multi-mode, LED, 2 Channels
| | 1300 nm, multi-mode, LED, 2 Channels
7I
| | 1300 nm, single-mode, ELED, 2 Channels
7J
| 7K | 1300 nm, single-mode, LASER, 2 Channels
| 7L | Channel 1 - RS422; Channel 2 - 820 nm, multi-mode, LED
| | Channel 1 - RS422; Channel 2 - 1300 nm, multi-mode, LED
7M
| 7P | Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, LASER
| | Channel 1 - G.703; Channel 2 - 1300 nm, single-mode LASER
7Q
| | G.703, 1 Channel
7R
| 7S | G.703, 2 Channels
| 7T | RS422, 1 Channel
| | RS422, 2 Channels, 2 Clock Inputs
7V
| 7W | RS422, 2 Channels
| 5A | 4 dcmA inputs, 4 dcmA outputs (only one 5A module is allowed)
| 5C | 8 RTD inputs
| 5D | 4 RTD inputs, 4 dcmA outputs (only one 5D module is allowed)
| 5E | 4 dcmA inputs, 4 RTD inputs
| 5F | 8 dcmA inputs
T60 Transformer Management Relay
2 PRODUCT DESCRIPTION

2.1.3 REPLACEMENT MODULES

GE Multilin
http://