Remote Mount Head - Disassembly - Motorola MTM700 Detailed Service Manual

MAINTENANCE

Remote Mount Head - Disassembly

CAUTION: The radio must be disconnected from the power supply before commencing any
!
disassembly. The Installation Manual should be referred to for more detailed information on
warnings and safety.
To Disassemble the Radio from the Control Head
1. Remove the Control Head from the Transceiver by inserting the dismantling tool (Motorola
part number 6686119B01) in the recess between the Control Head and the Transceiver.
2. Split the Controlhead into Front and Back housings by inserting the dismantling tool in the
recess between them.
NOTE: To minimize cosmetic damage disassemble from the bottom side (label side).
3. Remove the flex.
MTM700 Mobile Radio / Detailed Service Manual
Front Housing
Figure 8 Remote Mount Head
7 - 11
Back Housing