Application Programming - Motorola MTM700 Detailed Service Manual

PROGRAMMING THE RADIO
Hereafter, there is no need for quick sequence of pressing the radio keys.
8. Press the "Down" navigation key to scoll to "Cell Lists"
9. Press the "Ok" key.
10. Scroll through the lists, select List1 and press the "Ok" key to view the frequencies.
Restore the Frequencies of the Radio from a File
To restore previously saved frequencies of the radio, perform the following steps:
1. After testing your radio on the IFR, connect the setup shown in Figure 1 or Figure 2.
2. Run the CPS software on your PC.
3. In the menu bar click "Tools", "Copy Wizard".
•
•
•
•
•
•
•
•
Note: Click on toolbar "Read Phone" to check whether the correct frequencies were

Application Programming

Note: Login as "Administrator" to perform this task.
1. On the menu bar click "Tools", "Write Software".
Note: The CPS reads data from the radio. A progress bar is displayed on the computer
2. Press the "Write" button.
Note: The application is now being written into the radio. A progress bar is displayed on
3. Press the "OK" button.
4. Click the Toolbar " R" (Reset) icon to put radio into normal operating mode.
MTM700 Mobile Radio / Detailed Service Manual
Click on "Read from file".
Click on "Browse".
Open (Your selected File name) file.
Click on "Next".
Click on "Select All".
Click on "Next".
Click on "Write".
Click on "Done".
entered into the radio.
screen showing the reading status. After a successful reading, the "Write Software
To Phone" window appears on the computer screen.
the computer screen showing the writing status. After a successful writing, the
message "The Operation Was Successful" appears on the computer screen.
5 - 5