Table 7 Ap150 Led Descriptions; Table 8 Ap150-Controller Status Information - Meru Networks ap150 Installation Manual

Checking LED Activity
Table 7: AP150 LED Descriptions
LED
RF 2
RF 1
Status
Power
Table 8: AP150-Controller Status Information
State
Attempting to discover
Controller
Connected
Authenticated
Disconnected
Standalone
40 Meru Access Point Installation Guide
Function
The status LED for Radio 2 is a follows:
off—no radio present
yellow—radio initializing
red—radio failure
solid green—radio OK
blinking green—radio activity
The status LED for Radio 1 is a follows:
off—no radio present
yellow—radio initializing
red—radio failure
solid green—radio OK
blinking green—radio activity
AP-Controller operational status (see
green—presence of power
Interpretation
In the process of discovering the controller. The
AP is connected but not associated with the con-
troller. If the AP does not associate with the con-
troller after a period of time, verify that the
connection between the AP and the switch or the
switch and the controller is unbroken.
Normal operation without security.
Normal operation with security.
Access point was once connected to a controller
and configured by the controller, but can no
longer find that controller
Access point is operating in a standalone mode Purple blink
Table 8
)
AP150 LED Cycle
Green/Red/Blue/Red
Blue/Blue/Blue/Red
Blue/Blue/Blue/Red, for
2 seconds.
Blue blink
Green/Purple/
Green/Purple
a