Front Fork Removal - Gilera DNA 50 Workshop Manual

Suspensions
Removal
- Remove the drives and disconnect the electrical
terminals.
- Remove the bracket using the four screws.
Front fork
Removal
Pump unit disassembly
- Disassemble the front brake calliper using the
two screws.
- Remove the front wheel.
- Remove the front bumper
- Loosen the four set screws of the fork leg to the
plates and front cover indicated in the photo in or-
der to be able to remove the pump unit from below.
During disassembly be careful to support the cover
only with the brackets anchored to the fork leg.
SUSP - 94
DNA 50