Expansion Tank; Mixture Oil Tank - Gilera DNA 50 Workshop Manual

Chassis

Expansion tank

- Remove the helmet compartment.
- Remove the tow support screws shown in the
figure
- Disconnect the two hoses collecting the coolant
in a container

Mixture oil tank

- Remove the saddle, remove the battery cover,
disconnect the mix oil level connector and unscrew
the screw shown in the photo.
- Pull the tank out from the top, collect the oil in a
container and disconnect the oil supply hose.
Battery
Remove the saddle, unscrew the screw indicated
in the photo and remove the cover.
CHAS - 120
DNA 50