Replacement; Air Filter - Gilera DNA 50 Workshop Manual

DNA 50

Replacement

- Remove oil filler cap «A».
- Loosen oil draining cap «B» and allow for the
system to drain completely.
- Refit the draining cap and refill the hub with the
prescribed oil.
Characteristic
Rear hub oil
~ 85 cc

Air filter

-Remove the cap of the purifier, unscrewing the six
clamping screws and removing the filter.
Cleaning:
-Wash with water and neutral soap.
- Dry with a clean cloth and short blasts of com-
pressed air.
-Saturate with a 50% mixture of gasoline and oil.
-Drip dry the filter and then squeeze it between the
hands without wringing.
-Let it dry and refit it again.
CAUTION
NEVER RUN THE ENGINE WITHOUT THE AIR FILTER,
THIS WOULD RESULT IN AN EXCESSIVE WEAR OF THE
PISTON AND CYLINDER.
Recommended products
AGIP FILTER OIL Oil for air filter sponge
Mineral oil with specific additives for increased ad-
hesiveness
Maintenance
MAIN - 31