Helmet Bay - Gilera DNA 50 Workshop Manual

DNA 50

Helmet bay

- Remove the saddle and the left rear side panel.
- Open the helmet compartment, remove the ex-
pansion cap and the gas tank cover, then screw
the cap back on.
- Remove the two screws inside the helmet com-
partment indicated in the photo.
- Remove the saddle opening drives on both sides
using the two screws indicated in the photo.
- Remove the five screws connecting the two com-
partment guards indicated in the photo.
- Remove the fuel cap, separate the two guards
enough to let the fuel intake pipe pass and then
remove the compartment from the top.
Chassis
CHAS - 117