Use Dhcp - Siemens HiPath 2000 Administration Manual

3.3.2

Use DHCP

If this parameter is set to "Yes", the phone will search for a DHCP server on startup and try to
obtain IP data and further configuration parameters from that central server. The default is
"Yes".
If no DHCP server is available in the IP network, please deactivate this option. In this case, the
IP address, subnet mask and default gateway/route must be defined manually.
The change will only have effect if you restart the phone.
>
The following parameters can be obtained by DHCP:
Basic informations
• IP Address
• Subnet Mask
Optional informations
• Default Route (Routers option 3)
• IP Routing/Route 1 & 2 (Static Routes option 33)
• SNTP IP Address (NTP Server option 42)
• Timezone offset (Time Server Offset option 2)
• Primary/Secondary IP Addresses (DNS Server option 6)
• DNS Domain Name (DNS Domain option 15)
• Vendor Unique (option 43)
A31003-S2010-M100-10-7619, 27/08/2008
HiPath 2000/3000/5000 - OpenStage Family, Administration Manual
administration.fm
Administration
IP Network Parameters
3-13