Administration; Access Via Local Phone - Siemens HiPath 2000 Administration Manual

3

Administration

This chapter describes the configuration of every parameter available on the OpenStage
phones. For access via the local phone menu, see the following; for access using the web in-
terface, please refer to Section 2.3.1, "Access the Web Interface (WBM)".
3.1

Access via Local Phone

The data entered in input fields is parsed and controlled by the phone. Thus, data is
>
accepted only if it complies to the value range.
1. Access the Administration Menu
OpenStage 60/80:
v
Press the key once or twice to activate the administration menu (the
tween the user's configuration menu and the administration menu).
OpenStage 20/40:
Press the number keys 1, 0, and 3 simultaneously to enter the admininstration menu.
The key that is hit first will initiate the dialing process, and the first number will
>
be interpreted as part of a call number. To exit the dialing dialog, press the
key. This will deactivate the loudspeaker and stop the dialing process.
D
The key calls the HiPath configuration menu.
2. Enter Password
When the Admin menu is active, you will be prompted to enter the administrator password.
The default admin password is "123456". It is recommended to change the password (see
Section 3.11, "Password") after your first login.
For entering passwords with non-numeric characters, please consider the following:
By default, password entry is in numeric mode. For changing the mode, press the # key
once or repeatedly, depending on the desired character. The # key cycles around the input
modes as follows:
(Abc) -> (abc) -> (123) -> (ABC) -> back to start.
A31003-S2010-M100-10-7619, 27/08/2008
HiPath 2000/3000/5000 - OpenStage Family, Administration Manual
administration.fm
Administration
Access via Local Phone
v
key toggles be-
n
3-1