Hfa Gateway Settings; Using The Web Interface (Wbm); Using The Local Menu - Siemens HiPath 2000 Administration Manual
Hide thumbs
Also See for HiPath 2000:
- User manual (214 pages) ,
- Operating manual (152 pages) ,
- Operating instructions manual (141 pages)
Table of Contents
Advertisement
2.3.6
HFA Gateway Settings
To connect the OpenStage phone to the HiPath Communication System, the IP address of the
gateway, a subscriber number and the corresponding password is needed. The subscriber
number can be 1 to 24 characters long, and is used as the internal telephone number.
2.3.7
Using the Web Interface (WBM)
1.
Log in to the Administrator Pages of the WBM. For details about accessing the WBM, see
Section 2.3.1, "Access the Web Interface (WBM)".
2.
In the menu at the lefthand side, go to System > Gateway.
3.
Enter the IP address of the HiPath Communication System in the Gateway address field.
4.
In the Subscriber number field, enter the internal extension number of the phone. It can
be 1 to 24 characters long.
5.
Enter the subscriber password in the New subscriber password field.
2.3.8
Using the Local Menu
Take the following steps to configure the access to an HFA gateway (for further information see
Section 3.1, "Access via Local Phone"):
1.
Press the mode key
between the user's configuration menu and the administration menu).
2.
When the Admin menu is active, you will be prompted to enter the administrator password.
The default admin password is "123456". It is recommended to change the password (see
Section 3.11, "Password") after your first login.
3.
In the administration menu, go to System > HFA Gateway. For further instructions on en-
tering data using the Local menu see Section 3.1, "Navigate within the Administration
Menu". The path is as follows:
|
--- Administration
|
--- System
|
--- HFA Gateway
|--- IP address
|--- Subscriber Number
|
--- Password
4.
Enter the IP address of the HFA gateway provided by your HiPath communication system.
5.
Enter the phone's subscriber number, which will also serve as internal phone number.
6.
Enter the password associated with the subscriber number.
7.
After the data has been entered, select Save & exit and press
A31003-S2010-M100-10-7619, 27/08/2008
HiPath 2000/3000/5000 - OpenStage Family, Administration Manual
v
once or twice to activate the administration menu (the key toggles
inbetriebnahme.fm
Startup
Quick Start
.
2-25
Advertisement
Table of Contents
Troubleshooting
