Assembly; Connecting The Phone - Siemens HiPath 2000 Administration Manual

inbetriebnahme.fm
Startup
Assembling and Installing the Phone
2.2.3

Assembly

1. Handset
Insert the plug on the long end of the handset cable into the jack on the base of the tele-
phone and press the cable into the groove provided for it. Next, insert the plug on the short
end of the handset cable into the jack on the handset.
2. Emergency Number Sticker
Write your telephone number and those for the fire and police departments on the included
label and attach it to the telephone housing underneath the handset (see arrow).
2.2.4

Connecting the Phone

1. Plug the LAN cable into the connector
cable to the LAN/switch. If PoE (Power over Ethernet) is to be used, the PSE (Power
Sourcing Equipment) must meet the IEEE 802.3af specification.
For details about the required power supply, see the following table:
Model
OpenStage 20
OpenStage 20 G
OpenStage 40
OpenStage 40 + 2nd Key Module
OpenStage 40 G
OpenStage 40 G + 2nd Key Module
OpenStage 60/80
OpenStage 60/80 + 2nd Key Module
OpenStage 60/80 G
OpenStage 60/80 G + 2nd Key Module
1 Includes 1 Key Module.
2 Includes 1 Key Module + USB-Extension with Acoustic Unit.
2-4
1
1
2
2
HiPath 2000/3000/5000 - OpenStage Family, Administration Manual
at the bottom of the telephone and connect the
Power Consumption/Supply
Power Class 1
Power Class 2
Power Class 2
Power Class 3
Power Class 3
External power unit required
Power Class 3
Power Class 3
Power Class 3
External power unit required
A31003-S2010-M100-10-7619, 27/08/2008