Table of Contents
Advertisement
152 | Maintenance & Troubleshooting
4 Select Export to storage.
Figure 105: Export Confirmation Popup
5 Tap OK to export the contacts.
The VCF file is saved to the location indicated.
6 Follow the procedure
10.9 Resetting the LEX L10
When and where to use: If the LEX L10 does not operate properly, perform the following:
Procedure:
1 Power off and on the LEX L10 and verify if the problem is gone.
The LEX L10 restarts. If the problem remains, perform Step 2.
Caution: To avoid erasing important data from your LEX L10, do not press any of the LEX L10
buttons during power up.
2 Remove the battery, reinsert it, and verify if the problem is gone.
The LEX L10 restarts. If the problem remains, perform factory data reset.
10.9.1 Performing Factory Data Reset
A factory data reset is a software restore of the LEX L10 to its original manufacturer settings. Before resetting the
LEX L10, back up your data. Factory data reset erases all your personal data from the LEX L10 memory and
microSD card including: configuration, contents, accounts, installed applications, user settings, music, photos, videos,
installed licenses, pre-loaded application updates, DM bootstrapping data, integrated and pre-loaded application
Send Feedback
| February 2015 | MN001456A01-A
underBacking Up the LEX L10 on page 150
to complete the contacts backup.
Advertisement
Table of Contents
Troubleshooting
