Figure 53: Unpaired Screen
5.3 Requesting an Emergency Alert
This emergency alert procedure is used to indicate a critical situation and is similar to pressing the emergency alert
button on the radio. The emergency alert signal overrides any other communication over the selected channel on the
radio.
Prerequisites:
•
The radio is licensed and capable of P25 emergency call
•
The radio and the LEX L10 are successfully paired
When and where to use: Use this procedure to use the LEX L10 to trigger an emergency alert on the radio.
Procedure:
1 Swipe up from the
2 2.Tap Activate Emergency.
A popup displays giving you 2 seconds to cancel the emergency alert.
icon.
Radio Remote Control | 85
MN001456A01-A | February 2015 |
Send Feedback