Setting The Date And Time; Setting The Display; Setting Screen Brightness - Motorola LEX L10 Manual

2.10 Setting the Date and Time

When the LEX L10 is connected to cellular network, date and time are automatically synchronized.
When and where to use: Perform this procedure to manually set the date and time:
Procedure:
1 Tap
.
2 Tap
.
3 Tap Date & time.
4 Tap Automatic date & time to disable automatic date and time synchronization.
5 Tap Automatic time zone to disable automatic time zone synchronization.
6 Tap Set date.
7 Slide your finger up and down to select the month, date and year.
8 Tap Done.
9 Tap Set time.
10 Slide your finger up and down to select the hour, minutes and part of the day.
11 Tap Done.
12 Tap Select time zone.
13 Tap to select a time zone from the list.
14 Tap
.

2.11 Setting the Display

The following LEX L10 display features can be customize:
• Brightness — Set the brightness of the display.
• Auto-rotate — Set the content to rotate automatically when the LEX L10 is turned.
• Sleep — Set the length of time the LEX L10 waits before turning off the display's backlight.
• Daydream — Set the LEX L10 to launch a screensaver when the LEX L10 is docked inside a cradle or charging.
• Font size — Change the font size for display text.
• Cast screen —

2.11.1 Setting Screen Brightness

To set the screen brightness:
Procedure:
1 Tap
.
2 Tap
.
3 Tap Display.
4 Tap Brightness.
5 Tap Automatic brightness to set the device to automatically adjust the brightness using the built-in light sensor.
Use the slider to set a brightness level.
6 Tap
.
Getting Started with the LEX L10 | 43
MN001456A01-A | February 2015 | Send Feedback