Installing A Microsd Or Cryptr Micro Encryption Card; Figure 4: Removing The Battery Cover; Figure 5: Installing The Microsd Or Cryptr Micro Encryption Card - Motorola LEX L10 Manual

Figure 4: Removing the Battery Cover

2.3.3 Installing a microSD or CRYPTR micro Encryption Card

The LEX L10 card holder can support either a microSD card or a CRYPTR micro encryption card. The microSD card
is a removable flash memory used for storing media on the LEX L10. The LEX L10 can support microSD cards with
up to 64GB memory space. The CRYPTR micro encryption card is used for voice encryption in features such as data
and phone over Virtual Private Network (VPN) and Push-to-Talk (PTT) communication. The slot of the card is
located under the LEX L10 battery
When and where to use:
Note: The LEX L10 may be delivered to you with battery, SIM card and microSD or CRYPTR card
already installed, activated and ready for use. In case a CRYPTR is pre-installed in the LEX L10, you will
be required to change the CRYPTR password initially provided by your technical support. CRYPTR
password is required whenever the LEX L10 is restarted.
Procedure:
1 Slide the card into the card holder slot with contacts facing down.
2 Push the card into the slot until it is fully seated and locked into place.

Figure 5: Installing the microSD or CRYPTR micro Encryption Card

Getting Started with the LEX L10 | 29
MN001456A01-A | February 2015 | Send Feedback