Changing The Bluetooth Name; Connecting To A Bluetooth Device; Figure 96: Bluetooth Pairing - Motorola LEX L10 Manual

136 | Wireless

Figure 96: Bluetooth Pairing

9 Tap Pair on both devices.
The Bluetooth device is added to the Bluetooth devices list and a trusted ("paired") connection is established.

8.3.7 Changing the Bluetooth Name

By default, the LEX L10 has a generic Bluetooth name that is visible to other devices when connected.
Procedure:
1 Tap
.
2 Tap
.
3
Tap Bluetooth.
4 If Bluetooth is not on, slide the switch to the ON position.
5 Tap .
6 Tap Rename Phone.
7 Enter a name and tap Rename.
8 Tap
.

8.3.8 Connecting to a Bluetooth Device

Once paired, connect to a Bluetooth device.
Prerequisites: The Bluetooth device must be in discoverable mode.
Procedure:
1 Tap
,
Send Feedback | February 2015 | MN001456A01-A