Resetting The Lex Device; Figure 73: Import/Export Contacts Popup - Motorola LEX L10ig User Manual

Figure 73: Import/Export Contacts Popup

4 Select Import from .vcf file.
5 In the popup window, tap Allow.
6 In the folder that opens, select the .vcf file with contacts.
Return to Process
Back Up or Restore Data on Your Device
13.9

Resetting the LEX Device

Use this procedure to reset the LEX device.
When and where to use: If the device does not operate properly, perform the following procedure.
Procedure:
1 Power off and on the device and verify if the problem is gone.
The device restarts. If the problem remains, perform Step 2.
CAUTION: To avoid erasing important data from your device, do not press any of the
buttons during power up.
2 Press the Power button and hold it for 10 seconds.
The device restarts.
3 Remove the battery, reinsert it, and verify if the problem is gone.
The device restarts. If the problem remains, contact technical support.
Return to Process
Maintenance and Troubleshooting
Send Feedback
on page 183
on page 175
Chapter 13: Maintenance and Troubleshooting
MN003477A01-A
187