Motorola LEX L10 Manual page 77

- Quick Responses - Tap to edit quick responses to use instead of answering a call.
- Fixed Dialing Numbers — Use Fixed Dialing to restrict the phone to dial only the phone number(s) or area
code(s) specified in a Fixed Dialing list.
- TTY mode — Tap to set the TTY setting. Use an optional teletypewriter (TTY) device with the LEX L10 to
send and receive calls. Plug the TTY device into the LEX L10 headset jack and set the LEX L10 to operate in
one of the TTY modes.
Note: Use a TSB-121 compliant cable (provided by the TTY manufacturer) to connect the TTY
device to the LEX L10.
Set the LEX L10 volume to a middle level setting for proper operation. If you experience a high
number of incorrect characters, adjust the volume as needed to minimize the error rate.
For optimal performance, the LEX L10 should be at least 30 cm (12 inches) from the TTY device.
Placing the LEX L10 too close to the TTY device may cause high error rates.
+ TTY Off (default) — TTY is off.
+ TTY Full — Transmit and receive TTY characters.
+ TTY HCO — Transmit TTY characters but receive by listening to earpiece.
+ TTY VCO — Receive TTY characters but transmit by speaking into microphone.
- DTMF tones — Set the length of the DTMF tones. Available options are : Normal or Long.
- CDMA Call Settings:
+ Voice privacy — Enable enhanced privacy mode.
• Internet Call Settings
- SIP Accounts — Choose to receive Internet calls for accounts added to the device, view or change SIP
accounts, or add an Internet calling account.
- Use Internet Calling — Use Internet calling for all calls, only for calls to Internet calling addresses (the
default setting), or to ask for each call. Must be connected to a WiFi network and have added an Internet
calling account to the device to use Internet calling.
- IMS Account — Enable/Disable IMS Service Capability.
MN001456A01-A | February 2015 |
Calling | 77
Send Feedback