Chapter 5: Radio Remote Control - Motorola LEX L10 Manual

Chapter
5
Radio Remote Control
The Radio Remote Control application enables a LEX L10 user to control a P25 Land Mobile Radio (LMR) directly
from the LEX L10. In this way, the P25 radio can operate when carried inside a pouch and radio voice
communication is routed directly between the radio and a headset.
To communicate, the user taps and holds the Push-to-Talk (PTT) button on the LEX L10 screen. The button
simulates the PTT button on the side of the radio. The user can also switch between the radio zones, select favorite
channels and change the volume directly from the LEX L10 screen.
Note:
• This chapter applies to your LEX L10 only if your organization licensed this feature for your LEX L10.
• Pairing with APX models of the P25 Land Mobile Radio, requires purchasing a Mission Critical
Wireless option (an optional Bluetooth board inside the APX radio).
Before starting to use the P25 radio with the LEX L10, Bluetooth pairing is required. After paired with the radio, the
LEX L10 initiates a secure connection with the radio.
Important: After pairing the LEX L10 with the P25 Land Mobile Radio (LMR), maintain a distance of no
more than 30 feet (10 meters) between the LEX L10 and the radio. Controlling the radio and initiating an
emergency alert from the LEX L10 beyond 30 feet (10 meters) may fail.
The Radio Remote Controlapplication is used for:
• Push-to-Talk communication
• Switching radio zones
• Changing channels
• Setting and selecting favorite channels
• Changing radio volume
• Sending an emergency alert
• Monitoring the radio battery and signal power
79 | Radio Remote Control
MN001456A01-A | February 2015 | Send Feedback