Copy Parameters To Display; Copy Parameters From Display; Copy Firmware To Display - Siemens SITRANS LR560 Operating Instructions Manual

i) Navigate to Echo Profile (3.2.) and
press RIGHT arrow
profile. The false echo is now
screened out and the true echo
selected.
j) Press LEFT arrow
Measurement mode.

1.3. Copy Parameters to Display

Transfers parameter settings from a device to the local display interface.
• Press RIGHT arrow
• Press DOWN arrow
Start and RIGHT arrow
begin the transfer.
PARAM UPLOAD is displayed, then the device returns to Measurement mode.

1.4. Copy Parameters from Display

Transfers parameter settings from the local display interface to a device.
• Press RIGHT arrow
• Press DOWN arrow
Start and RIGHT arrow
begin the transfer.
PARAM DOWNLOAD is displayed, then the device returns to Measurement mode.

1.5. Copy Firmware to Display

Transfers firmware from a device to the local display interface.
• Press RIGHT arrow
• Press DOWN arrow
Start and RIGHT arrow
the transfer.
SW UPLOAD is displayed, then the device returns to Measurement mode.
A5E34647946 SITRANS LR560 (mA/HART) – OPERATING INSTRUCTIONS
to request a
to return to
Connecting SITRANS LR560
See
on removing the local display interface.
to Edit.
to select
to
to Edit.
to select
to
to Edit.
to select
to begin
true echo
false
echo
on page 27 for instructions
Page 85