3)
Click on Apply.
Step 3 – Ranges
Note: Selecting SLOW Response Rate changes setting for Average Amount (2.7.5.3.) to
0.9.
1)
Click on Step 3.
2)
Change units if desired (in meters by default).
3)
Set High and Low Calibration points.
4)
Set Response Rate.
5)
Click on Apply.
1)
For details see
A5E34647946
SITRANS LR560 (mA/HART) – OPERATING INSTRUCTIONS
Sensor Mode (2.2.2.)
on page 140.
Page 65