Siemens SITRANS LR560 Operating Instructions Manual page 119

4.7.6. Service interval
Note: The device always operates in years. Changing the units affects only
the parameter view of the Service Interval parameters in SIMATIC PDM.
User-configurable recommended time between product inspections.
Values
a)
Units are selectable only via SIMATIC PDM.
4.7.7. Maintenance Status
Indicates which level of maintenance reminder is active.
Open the menu View – Device Status, click on the Maintenance tab and check
the Service Schedule Status window.
4.7.8. Acknowledge Status
Indicates which level of maintenance reminder has been acknowledged.
Open the menu View – Device Status, click on the Maintenance tab and check
the Service Schedule Status window.
4.7.9. Acknowledge
Acknowledges the current maintenance reminder.
To acknowledge a reminder via SIMATIC PDM:
a) Open the menu View – Device Status and click on the Maintenance tab.
b) In the Service Schedule Status section click on Acknowledge Warnings.
To acknowledge a reminder via the local control buttons or handheld
programmer:
a) Press RIGHT arrow twice to open parameter view and activate Edit Mode.
b) Press RIGHT arrow to acknowledge the reminder.
A5E34647946 SITRANS LR560 (mA/HART) – OPERATING INSTRUCTIONS
a)
Units : hours, days, years
Range: 0 to 20 years
Default: 1.0 year
Page 113