Table of Contents
Advertisement
Chapter 2: MWR Device Installation
MWR Device Assembly
Figure 2-2 shows the external connection points for the MWR device.
Figure 2-2
MWR Device Deployment and Installation
The MWR device requires professional installation to ensure that the installation is performed in
accordance with Motorola installation standards. All common precautions for grounding and
electrostatic discharge protection should be observed during deployment and installation.
Observe the following additional guidelines when deploying fixed Infrastructure devices (MWR and
IAP):
•
•
•
•
Error! Reference source not found. Error! Reference source not found.
Infrastructure Device External Connection Points (TBD)
The MWR may be mounted on a pole having a diameter of 1-3.5 inches, utilizing the
provided bracket.
The antenna must have a separation distance of at least 2 meters from the body of all
persons and must not be co-located or operating in conjunction with any other antenna
or transmitter.
Users and installers must be provided with antenna installation and transmitter operating
conditions to satisfy RF exposure compliance.
When deploying the MWR, the antenna should be a minimum of 30 inches from any
nearby metal poles to avoid distortion of the RF pattern.
2-4
Advertisement
Table of Contents
