Technical Information; Certificates And Approvals - Siemens SIMATIC IPC477E Operating Instructions Manual

Technical information

8.1

Certificates and approvals

The device meets the guidelines listed in the following sections.
EU Declaration of Conformity
The associated declaration of conformity is available on the Internet at the following address:
Panel PC certificates
(http://support.automation.siemens.com/WW/view/en/10805572/134200).
ISO 9001 certificate
The Siemens quality management system for our entire product creation process
(development, production and sales) meets the requirements of ISO 9001:2008.
This has been certified by DQS (the German society for the certification of quality
management systems).
Certificate no.: 001323 QM08
Software license agreements
If the device is supplied with preinstalled software, you must observe the corresponding
license agreements.
UL approval
● Underwriters Laboratories (UL) in accordance with standard UL508 (IND.CONT.EQ), File
E85972
● Canadian National Standard CAN/CSA-C22.2 No. 142
SIMATIC IPC477E
Operating Instructions, 12/2016, A5E37455003-AB
8
111