Siemens SIMATIC IPC477E Operating Instructions Manual page 132

Technical information
8.4 Technical specifications
Interfaces
COM 1, COM 2 (optional)
2 x DisplayPort (DPP)
Keyboard
Mouse
USB
Ethernet
Slot for PCIe expansion cards
For unique labeling, the Ethernet ports are numbered on the enclosure. The numbering by the
1
operating system can differ.
Teaming can be set and initiated in the configuration interface. In teaming operation, jumbo
2
frames, e.g. for the camera application, are not supported.
132
1
RS232/RS422/RS485, max. 115 kbps, 9-pin, D-Sub pin
Connection of display devices with DisplayPort connection
Connection via USB port
Connection via USB port
Back of device:
4 x USB 3.0, a maximum of 2 can be operated in high-current
•
mode at the same time
Front of device (only for devices with resistive touch screen with
15", 19" and 22" display):
1 × USB 3.0, high current
•
3 × RJ45 connection, Intel 1 x I219LM, 2 x I210
10/100/1000 Mbps, electrically isolated, teaming-capable
Only for device with expansions:
1 × PCIe-x4 expansion card can be used
•
Max. permissible power loss: 8 W
•
Operating Instructions, 12/2016, A5E37455003-AB
2
SIMATIC IPC477E