Windows Embedded Standard 7 - Siemens SIMATIC IPC477E Operating Instructions Manual

7.5.1.4

Windows Embedded Standard 7

General installation procedure
If your software becomes corrupt for any reason, you can reinstall it using the supplied USB
stick. The USB stick contains an image file for the device memory with the original software
package (operating system with installed hardware drivers).
Note
You require a USB keyboard and the supplied USB stick to reinstall the operating system.
Before performing the new installation, you should check the date and time set in the BIOS
Setup, "Main" menu, and correct these if necessary.
Language selection in Windows Embedded Standard 7
You can change the language using the supplied USB stick. The USB stick contains the
required language packages and help for changing the system language.
Note
Note the license terms of Windows Embedded Standard 7
Note the license terms for Windows Embedded Standard 7 and especially the extended
software terms of the Siemens AG.
You can find the license terms in the delivered document "MICROSOFT SOFTWARE
LICENSE TERMS for Windows Embedded Standard 7" and in the system drive under
\Windows\System32\license.rtf.
SIMATIC IPC477E
Operating Instructions, 12/2016, A5E37455003-AB
Maintaining and servicing your device
7.5 Installing the software
103