Siemens SIMATIC IPC477E Operating Instructions Manual page 71

Configure the SIMATIC IPC EWF Manager as follows:
● "Start > All Programs > Siemens Automation > SIMATIC > EWF Manager > EWF
Settings"
or
● Click the "SIMATIC IPC EWF Manager" icon in the system tray.
The following functions are available:
Function
Write-protect drive C: Power on
Write-protect drive C: disable: the modified data are
applied
Modified data on drive C: apply
Display information about the EWF drive
Display help
Note
The EWF commands affecting the write protection do not become active until after the next
booting process.
Note
The EWF command
SIMATIC IPC477E
Operating Instructions, 12/2016, A5E37455003-AB
-
ewfmgr c: commitanddisable
Operating the device and device functions
5.5 Extended device functions
Command
-
ewfmgr c: enable
-
ewfmgr c: commitanddisable
-
ewfmgr c: commit
ewfmgr c:
ewfmgr /h
may not be used with the option - .
live
71