Add_Transport_Udp_N; Sip_Add_Diversion_N; Transfer_Recall_Tim; Signal_Compression_N - Panasonic KX-HDV100 Administrator's Manual

5.3.19 SIP Settings

ADD_TRANSPORT_UDP_n

Parameter Name Example
Value Format
Description
Value Range
Default Value

SIP_ADD_DIVERSION_n

Parameter Name Example
Value Format
Description
Value Range
Default Value

TRANSFER_RECALL_TIM

Value Format
Description
Value Range
Default Value

SIGNAL_COMPRESSION_n

Parameter Name Example
Value Format
Description
Value Range
Default Value
220 Administrator Guide
ADD_TRANSPORT_UDP_1
BOOLEAN
Specifies whether to add the attribute "transport=udp" to the SIP header
URI.
•
Y (Add Transport UDP)
•
N (Do not add Transport UDP)
N
SIP_ADD_DIVERSION_1
INTEGER
Specifies whether to add Diversion header information.
0–2
–
0: Do not add Diversion header information
–
1: Use own diversion information only for the Diversion header
–
2: Add diversion information to existing Diversion header
0
INTEGER
Specifies the time that the original call is resumed when the forwarding
party does not response by Refer method for call transfer.
0, 1–240
0
SIGNAL_COMPRESSION_1
INTEGER
Specifies whether to use signal compression. When using signal
compression, select Required or Supported.
•
0: Disable
•
1: Enable (Required)
•
2: Enable (Supported)
0
Document Version 2015-02