TABLE 19 Chassis power surge and drop protection
Property
Power surge
Power drop
Connecting AC power to the chassis
AC power is supplied though an AC power cord that is connected to the back of the chassis. Perform the following tasks to connect AC
power to the chassis.
1.
At the rear of the chassis, locate the power receptacles on the power supplies.
2.
Lift the cord-retainer and connect a Brocade-supplied AC power cord to the power supply.
Brocade FastIron SX Series Chassis Hardware Installation Guide
Part Number: 53-1003613-04
Protection Mechanism
MOV and Spark Gap protection
An AC loss of >15ms will cause the power supply to shut down due to
input under-voltage
Powering on the system
67