Step 3 Adjust The Image; Setting The Display Resolution Of The Computer - Canon WUX500 User Manual

Step 3 Adjust the Image

Setting the Display Resolution of the Computer

Based on the maximum resolution of the projector, set the display resolution of the
computer to the resolution closest to the output signal resolution of the projector.
(P172)
Maximum resolution
1920 X 1200 dots
■ Windows 8
1
Move the cursor toward the upper or lower right corner to access the
menu.
2
Click [Settings], and then click [Control Panel].
3
From [Control Panel Home] -
[Appearance and Personalization],
select [Adjust screen resolution].
4
Click the [Resolution] tab, and move the
slider to select the resolution closest to
the maximum output signal resolution
of the projector.
5
Click the [OK] button.
■ Windows 7
1
Open the [Control Panel] from the start
menu, then select [Appearance and
Personalization] - [Adjust screen
resolution] in the [Control Panel Home].
2
Click the [Resolution] tab, and move the
slider to select the resolution closest to
the maximum output signal resolution
of the projector.
3
Click the [OK] button.
Projection Procedure
51