1.
Remove the six [6] DT screws from the lower portion of the Burner Tube Mount Brackets.
2.
Slide the Burner Tube away from the Plumbing Connection until it disengages from the orifice.
3.
Reverse these steps to reinstall.
Turn off Unit and allow to cool before cleaning. Only a Qualified service technician
1.
Lift off Valve Access Cover. Remove Valve Heat Shield.
2.
Remove the Glass Door from the unit. Loosen Liner Clips in Firebox Top & remove End Panels. Remove DT screws and lift out the
False Bottom.
3.
Remove the DT screws around the perimeter of the burner pan.
4.
Carefully work the burner pan loose & lift the assembly upward to remove it from the firebox cavity.
5.
Installation is the reverse of these steps. Ensure that the mounting surface is clean & fresh
burner pan.
should service and repair this appliance.
!
is used to reseal the
68