Marquis MQRB4436N Installation Instructions Manual page 16

An Kit is required for a Single Sided Installation.
- Determine whether the
and wall to be covered with Non-Combustibles, such as tile), or the
with the face of the fireplace (Flat Wall appearance).
If using optional surround, maximum thickness for non-combustible material is 3/4".
will be flush with the face of the fireplace (Fireplace
Framing Style shown is for illustration purposes only.
This structure is NOT load bearing.
[Steel Stud Framing Shown]
Dimension is for Wall Surface Flush with fireplace.
Add 1/2" to this Dimension where a non-combustible wall surface
will cover the unit (See Nailing Tab Guide Page also).
1" Min Clearance Around All Sides of Airbox
will be flush
(Continued)
16