Marquis MQRB4436N Installation Instructions Manual page 47

Single Sided:
Back Liner, End Panel, and
False Bottom Installation:
1. Remove Liner Clips
from the inside of the
!
Firebox .
2. Place the Back Liner
onto the firebox bottom
with bends facing the
rear firebox cover. Lift
into place and set down
on firebox ledge (See
).
3. Next install the False
Bottom with larger
Dimension to Front
Glass Opening (
and secure it using DT
screws into the
mounting tabs on the
Burner Tube. Insert
Pilot Shield and False
Bottom Cover into
False Bottom.
4.
Place End Panels on
top of the False Bottom
and tilt into place at
either end of the
Firebox. Replace the
Liner Clips ( ).
!
Both Porcelain and Painted
Metal Liners may discolor and
warp during normal operation of
your appliance. This is normal,
and not considered a defect.
!
(uses 5143PLE),
: Failure to position the parts in accordance with these diagrams or failure to use only parts
specifically approved with this appliance may result in property damage or personal injury.
),
-[1ea.] Porcelain False Bottom
-[1ea.] Porcelain Back Liner Panel
-[2ea.] Porcelain End Panels
(See Thru Instructions on Other Side)
47