Configure The Settings Relating To Images And Audio [Image/Audio]; Configure The Settings Relating To The Image Capture Mode [Image] - Panasonic WV-X6531N Operating Instructions Manual

2.5 Configure the settings relating to images and
audio [Image/Audio]
The settings relating to JPEG, H.265, and H.264 images such as the settings of image quality, audio, etc. can
be configured on this page.
The "Image/Audio" page has the [Image] tab, the [Image/Position] tab, and the [Audio] tab.
2.5.1 Configure the settings relating to the image capture mode
[Image]
Click the [Image] tab on the "Image/Audio" page. (®For menu display and how to operate, refer to page 47,
page 48)
[Image capture mode]
•
X6531
2 mega pixel [16:9](30fps mode)/2 mega pixel [16:9](60fps mode)/3 mega pixel [4:3](30fps mode)
–
Default: 2 mega pixel [16:9](30fps mode)
•
X6511
1.3 mega pixel [16:9](30fps mode)/1.3 mega pixel [16:9](60fps mode)/1.3 mega pixel [4:3](30fps mode)
–
Default: 1.3 mega pixel [16:9](30fps mode)
IMPORTANT
•
The positions of areas may move out of alignment when the "Image capture mode" setting is changed
when the following area settings are configured. Therefore we recommend that you configure each
area setting after configuring the "Image capture mode".
–
mask area (®page 118)
–
privacy zone (®page 135)
–
VMD area (®page 162)
–
VIQS area (®page 138)
Note
•
When "VIQS Area" is enabled, and the setting value for the aspect ratio is changed from "4:3"
to"16:9", make sure that the VIQS setting value does not exceed the maximum designated range.
2 Settings
Operating Instructions 95