Sd Memory Card - Panasonic WV-X6531N Operating Instructions Manual

2 Settings
[Router global address]
The global address of router will be displayed.
Self check
The self check result of the hardware will be displayed. If all the items are "0", it indicates that the hardware is
working normally.
Hardware information
Information about PAN, TILT, ZOOM, FOCUS, Day Night(IR), reboot counter, operating time, and
thermo-sensor will be displayed.
Note
•
Refer to our website (http://security.panasonic.com/support/info/) for further information about the
contents of the displayed statuses (relating to the "Viewnetcam.com" service, the UPnP function, or
the self check).

SD memory card

[Model no.]
This model does not support the model number display function.
[Serial no.]
This model does not support the serial number display function.
[Remaining capacity]
Displays the remaining capacity and total capacity of the SD memory card.
This is the same information that is displayed in [Remaining capacity] of the SD memory card information on
the [SD memory card] tab of the "Basic" page.
[Total use time]
Displays the length of time that SD memory card has been inserted into and used with the camera.
If the length of time that the SD memory card has been used for cannot be obtained, "Unknown" is displayed.
"Total use time" is updated once per hour.
[Number of overwrite times]
Displays the number of overwrite times as calculated from the total capacity of the SD memory card, the number
of times the camera has written files to the SD memory card, and the file sizes.
If the number of overwrite times cannot be calculated, "Unknown" is displayed.
Note
•
Because the overwrite time values are just estimates calculated by the camera, they may differ to the
actual number of overwrite times.
[No.] / [Time & date] / [Description] of the log
Displays the log related to the SD memory card.
238 Operating Instructions