Configure The Settings Relating To Images And Audio [Image/Audio]; Configure The Settings Relating To Images [Jpeg/H.264] - Panasonic WV-SF448 Operating Instructions Manual

11 Configure the settings relating to images and
audio [Image/Audio]
The image setting, JPEG and H.264 image settings, and settings relating to image quality, audio, etc. can be
configured on this page.
The "Image/Audio" page has 4 tabs; the [JPEG/H.264] tab
[Cam. Function] tab.
When "Image capture mode" is "VGA Quad streams [4:3]", the [H.264] tab is displayed.
*1
11.1 Configure the settings relating to images [JPEG/
H.264]
Click the [JPEG/H.264] tab on the "Image/Audio" page. (®page 55, page 57)
The following is a description of "Image capture mode".
[Image capture mode]
Select an image to be displayed on the "Live" page.
The following "Image capture mode" settings can be configured depending on the mounting position. Refer to
page 10 for further information about each "Image capture mode" setting.
–
<Ceiling>
2M Double Panorama [16:9]/ 1M Double Panorama [16:9]/ 1.3M Quad PTZ [4:3]/ 1.3M Single PTZ [4:3]/
Double Panorama + Quad PTZ/ Double Panorama + Single PTZ
–
<Wall>
2M Panorama [16:9]/ 1M Panorama [16:9]/ 1.3M Quad PTZ [4:3]/ 1.3M Single PTZ [4:3]/ Panorama + Quad
PTZ/ Panorama + Single PTZ
–
<Ceiling/Wall>
3M Fisheye [4:3]/ 1.3M Fisheye [4:3]
–
<Ceiling>
VGA Quad streams [4:3]
•
Default: 2M Double Panorama [16:9]
IMPORTANT
•
For information on images that can be selected in "Image capture mode", refer to page 9.
•
If the "Image capture mode" setting is changed when the following area settings are configured, perform
the area setting again.
–
Privacy zone (®page 119)
–
VMD area (®page 137)
–
VIQS area (®page 121)
–
Mask area (®page 110)

11 Configure the settings relating to images and audio [Image/Audio]

, the [Image/Position] tab, the [Audio] tab and the
*1
Operating Instructions 89