Panasonic WV-X6531N Operating Instructions Manual page 58

2 Settings
Camera action on alarm
[Terminal alarm 1]
Select an action to be taken when a terminal alarm 1 is detected from the following.
This setting is available when "Terminal 1" is selected for "Alarm input(TRM1)" of the [Alarm] tab.
•
Off: Does not take any action even when a terminal alarm 1 is detected.
•
1-256: If a previously registered preset position is selected, when a terminal alarm 1 is detected, the camera
will move to that position.
•
Auto track: When a terminal alarm 1 is detected, the camera will start the auto tracking.
•
Patrol 1: When a terminal alarm 1 is detected, the camera will start the patrol.
* If "Patrol 1" is not registered, it is not displayed on the screen.
•
Default: Off
[Terminal alarm 2]
Select an action to be taken when a terminal alarm 2 is detected from the following.
This setting is available when "Terminal 2" is selected for "Alarm input(TRM2)" of the [Alarm] tab.
•
Off: Does not take any action even when a terminal alarm 2 is detected.
•
1-256: If a previously registered preset position is selected, when a terminal alarm 2 is detected, the camera
will move to that position.
•
Auto track: When a terminal alarm 2 is detected, the camera will start the auto tracking.
•
Patrol 2: When a terminal alarm 2 is detected, the camera will start the patrol.
* If "Patrol 2" is not registered, it is not displayed on the screen.
•
Default: Off
[Terminal alarm 3]
Select an action to be taken when a terminal alarm 3 is detected from the following.
This setting is available when "Terminal 3" is selected for "Alarm input(TRM3)" of the [Alarm] tab.
•
Off: Does not take any action even when a terminal alarm 3 is detected.
•
1-256: If a previously registered preset position is selected, when a terminal alarm 3 is detected, the camera
will move to that position.
•
Auto track: When a terminal alarm 3 is detected, the camera will start the auto tracking.
•
Patrol 3: When a terminal alarm 3 is detected, the camera will start the patrol.
* If "Patrol 3" is not registered, it is not displayed on the screen.
•
Default: Off
[VMD alarm]
Select an action to be taken when a VMD alarm is detected from the following.
•
Off: Does not take any action even when a VMD alarm is detected.
•
1-256: If a previously registered preset position is selected, when a VMD alarm is detected, the camera
will move to that position.
•
Auto track: When a VMD alarm is detected, the camera will start the auto tracking.
•
Patrol 1: When a VMD alarm is detected, the camera will start the patrol.
* If "Patrol 1" is not registered, it is not displayed on the screen.
•
Default: Off
[Audio detection alarm]
Select an action to be taken when a sound alarm is detected from the following.
•
Off: Does not take any action even when a sound alarm is detected.
•
1-256: If a previously registered preset position is selected, when a sound alarm is detected, the camera
will move to that position.
•
Auto track: When a sound alarm is detected, the camera will start the auto tracking.
•
Patrol 1: When a sound alarm is detected, the camera will start the patrol.
* If "Patrol 1" is not registered, it is not displayed on the screen.
58 Operating Instructions